IA290 - 2.9M ISLAND INFLATABLE BOAT

+

3HP REMIGO ELECTRIC OUTBOARD MOTOR

UNBEATABLE BOAT / MOTOR PACKAGE DEALS

IA290 Island Inflatable AIR-Deck Boat

White / Black Trimming

The 2.9m Island Inflatable Boat with AIR-Deck Floor, paired with the European-made 3hp REMIGO Electric outboard motor, is the best boat & motor package to use as a tender for your Cruiser / Yacht over 30ft. This is Island Inflatables largest roll-up tender with 2 seats. The Island 2.9m is also a perfect size boat to take away on holidays, as its compact size and light weight make it convenient to pack away in the back of a car or caravan.

The REMIGO uses an adjustable shaft length. So it gives you the option of using this motor on both your Island Inflatable Tender. Then extend the leg out to a long shaft and use it as a motor on your yacht.

No other boat & motor packages available in Australia will come close to our prices and quality.

Island Inflatable boats are Australian-designed using the latest "High Frequency Thermo Welding" (HFTW) techniques on all seams for durability against Australia's harsh conditions. You'll never have an Island Inflatable seam come apart due to heat or hot days due to HFTW.

It's not only our manufacturing processes that make Island Inflatables the #1 selling privately owned brand in Australia. It's our unique features and attention to detail. Firstly, all our boats are designed by "Island Inflatables.". Most brands you see online and in-store are boats purchased at trade fairs with brand names then placed on them. 

Let's start with our materials. Island Inflatables use the heaviest grade of PVC material possible before going into the commercial grades used in the armed forces, etc. Our grade is 1100 D-teck Denier / 0.9mm thickness. 

All our tubes sizes are oversized. This makes for a nicer riding boat. It's more comfortable to be sitting on the side of an inflatable with larger tubes. It also creates a much drier ride.

Island Inflatable transoms are constructed with marine ply coated with epoxy coating and rubber sealing on top. An internal and external outboard mounting plate. As well as a 1 way bung, which allows you to remove the bung and drive the boat to remove any excess water under the floor.

A good way to see if an inflatable boat is a quality inflatable boat is by the tow rings located at the front of the boat. Island Inflatable boats use a large, heavy-duty stainless steel tow ring. Mounted on an equally large and reinforced mounting patch. Lesser quality boats will always use a smaller ring and patch with no reinforcing.

Island Inflatable Boats pay special attention to wear and tear. We use non-marking rubbing / wear strips around the side and under the keel. This protects both the inflatable boat and the larger cruiser / yacht that you may be using the Island Inflatable for as a tender. Plus the larger boat won't end up with unsightly rub marks on it.

All Island Inflatables come standard with an over-inflation valve. Fitted to help with hotter days and increased air pressure.

On the underside of each oversized tube, we apply a 2nd layer of PVC material. This helps when dragging or launching your inflatable off a beach. It gives that extra layer of protection from any hidden rocks, shells, etc.

Island Inflatables offset the grab / safety rope to the side of the tube instead of the top. This is so when sitting on the tubes, your not sitting on an uncomfortable rope.

What stands out most with the Island inflatable boats is the unique and very useful internal rear carry handles. This was our first design feature we came up with. Having the handles on the outside rear tubes makes it impossible for 1 person to carry the boat. Also, the handles are made from a much harder material, which can easily scratch your cruiser / yacht. So it made perfect sense to move the handles from the outside of the rear tubes to the inside.

Lastly, the look/aesthetics of our Island Inflatable boats. Once again, so much thought has been put into the colour schemes. You'll find models from 2m up to 2.9m are white and black. This is because in this size, the main use is for tenders to larger cruisers / yachts. We want your Island Inflatables to compliment your pride and joy by blending in, not standing out, while floating off the back of your boat. The 3.3m up to 4.3m models are more day boats. We use a light grey colour so they hide and dirty marks easier, plus the colour isn't dark enough to attract the heat of the sun and make it uncomfortable for you to sit on.

SPECIFICATIONS:

• Overall length:   2.9m /  9.6ft
• Inside length:   183cm
• Overall width:   160cm
• Inside width:   75cm
• Tube diameter:   44cm
• Chambers:   3 + Floor + Keel
• Person capacity:   4 Persons   
• Cargo capacity:   450kg
• Max motor power:   10hp / 7.4kw
• Boat weight (Boat/Floor/Oars/Seat): 35 kg
• Floor options: Air-Deck  

Tube AIR Pressures in Sequence of Inflation:

1. Outside Tubes:    3.6 PSI
2. Inflatable Floor:  10 PSI
3. Inflatable Keel:    3.6 PSI

FEATURES:

• Material: Heavy-duty 1100 D-Teck denier polyester-coated PVC. Weight - 1100 g/m2 Thickness 0.9mm
• AIR-Deck Floor: High-pressure floor for a rigid ride and firm to stand on.
• Inflatable keel
• Double layer of PVC material on underside of tubes
• 2 Seats
• 2 Internal Rear Carry handles
• Combination Front Carry handle Bow ring with mooring rope
• 2 Heavy Duty Stainless steel tow rings with extra reinforcing
• Non-marking all-round rubbing strakes.
• Off-set Safety / Grab ropes
• 24mm thick marine-grade transom with rubber capping
• Inside / Outside motor plates
• Self-bailing one-way bung / drain plug
• Overinflation valve
• 2 Internally sealed bulkheads to equalize tube pressures

STANDARD EQUIPMENT:

• Dual Action Hand Pump.
• Carry Bag
• Set of Oars
• 2 Seats
• Repair kit

ISLAND INFLATABLES BOATS

Australia's favourite inflatable boat since the summer of 2000

_______________________

 

REMIGO ONE Electric Outboard

Experience the Freedom of Sustainable Boating with the REMIGO ONE Electric Outboard

The REMIGO ONE isn't just an outboard motor; it's a gateway to a cleaner, quieter, and more enjoyable boating experience. This innovative electric outboard, engineered in Slovenia, EU, offers a sustainable alternative to traditional gasoline engines, minimising your environmental impact while maximising your enjoyment on the water.

Key Benefits:

• Eco-Friendly Operation: Enjoy zero emissions and significantly reduced noise pollution, creating a more peaceful and environmentally conscious boating experience.
• Quiet and Peaceful: Experience the serenity of the water without the disruptive noise of traditional engines.
• Easy on the Environment: Reduce your carbon footprint and help preserve the delicate aquatic ecosystems.

 

SPECIFICATIONS:

• Power: 1KW
• Power Captible with a Petrol motor: 3 hp
• Shaft Length:   Fully adjustable from Short (15 Inch) to Long (20 Inch) shaft
• MAX Propeller RPM: 1000 rpm
• Weight:   12kg (14.5kg with Bracket)
• Thrust:   Up to 1500kg boats
• Battery: Integrated 1085 Wh Li-ion
• Nominal Voltage:   36V
• Final Charging Voltage:   42V
• Rated input voltage AC charger:   100 - 240 V, 50-60 Hz
• Rated input voltage DC charger:   12 - 24V
• Attaching method: 2 Clamp Screws
• Control:   2-Button control
• Control Direction:  Forward / Neutral / Reverse
• Steering:   Lockable
• Tilting:   Manual with grounding protection
• Tilt:   Manual, 4 positions
• Waterproof rating: IP67
• Measurements:   1250mm x 295mm x 90mm
• Warranty:   2 Years

CHARGING OPTIONS:

Chargers: 

• Standard 240V Supplied with motor:           6 Hrs
• Faster Charger Optional accessory:             3 Hrs
• DC 12 - 24V Charger Optional accessory:    12 Hrs

PERFORMANCE:

MODE:               SPEED IN KNOTS (KM/H)       RANGE IN NM (KM)

• Eco:             2.0  (3.7)                                    30  (55)
• Cruise:         3.0  (5.5)                                    14  (25.6)
• Full Speed:   5.0  (9.2)                                    4.9  (9.1)

Designed for Your Convenience:

• Integrated Battery: The sleek and compact design eliminates the need for bulky external batteries, making it easy to transport, store, and install.
• Adjustable Shaft: Easily adjust the shaft length to accommodate various boat sizes and water depths.
• Intuitive Controls: Simple and user-friendly controls make operating the REMIGO ONE a breeze.

Experience the Difference Today

The REMIGO ONE is more than just an outboard motor; it's a commitment to a cleaner, quieter, and more enjoyable boating future.